Home > Band Parts > Speargun Rubber > 5/8in(16mm) O.D.
Speargun Rubber Tubing >

Primeline Speargun Band Rubber Tubing
5/8in(16mm) Outside Dia. 1/8in(3mm) Inside Dia.
spearitco.com 5/8 inch (16mm) Speargun Rubber
 
Alternative Views:

Our 5/8 inch speargun rubber is Made by Primeline Industries of Ohio, U.S.A.. The title of each listing contains the manufacturer and color of the rubber.

    Curious about the manufacturing process?
    Wondering why you can't buy natural latex tubing in longer continuous pieces?
    Check out our Knowledge Base article on Dip Manufacturing.

    Item# Item Name $/Ft.      Total Quantity Add
    RUBR-163A-02FT
    2ft(0.6 m) AMBER 5/8in Rubber
    $11.99
    RUBR-163A-03FT
    3ft(0.9 m) AMBER 5/8in Rubber
    $12.99
    RUBR-163A-04FT
    4ft(1.1 m) AMBER 5/8in Rubber
    $13.99
    RUBR-163A-05FT
    5ft(1.5 m) AMBER 5/8in Rubber
    $17.99
    RUBR-163G-02FT 2ft(0.6 m) GREEN 5/8in Rubber
    $3.99
    $10.99
    RUBR-163G-03FT 3ft(0.9 m) GREEN 5/8in Rubber
    $12.99
    RUBR-163O-02FT 2ft(0.6m) ORANGE 5/8in Rubber
    $3.99
    $10.99
    RUBR-163O-03FT 3ft(0.9m) ORANGE 5/8in Rubber
    $12.99
    RUBR-163O-04FT 4ft(1.1m) ORANGE 5/8in Rubber
    $3.25
    $13.99
    RUBR-163O-05FT 5ft(1.5m) ORANGE 5/8in Rubber
    $18.99
    Check the items you wish to purchase, then click


    Tech Specs:

    Dimensions

    Outside Diameter - 5/8in (16mm)
    Inside Diameter - 1/8in (3mm)
    Outside Diameter Tolerance - ±0.02in
    Length - The described length is the minimum length and the actual length will be greater in most cases.

    Physical Properties for Primeline Industries Latex Rubber Tubing

    Modulus at 100% - 125 PSI maximum
    Tensile Strength - 3500 PSI minimum
    Elongation at Break: - 750% minimum
    Specific Gravity - 0.97 maximum
    Shore A Durometer Hardness - 35 ± 5

    Physical Properties for Kent Elastomer Latex Rubber Tubing

    Modulus at 100% - 120 PSI average
    Modulus at 300% - 190 PSI maximum
    Modulus at 500% - 300 PSI minimum
    Tensile Strength - 3500 PSI minimum
    Elongation at Break: - 750%
    Specific Gravity - 0.95 minimum
    Shore A Durometer Hardness - 35 ± 5




    Compatibility:

    General Compatibility - This item can be used with some products of Riffe®, Wong®, Mako®, Koah®, Hammerhead®, C4®, Salvimar®, Spetton®, Rob Allen®, JBL®, Cressi®, Picasso®, Beauchat®, Biller®, Ocean Rhino®, Spearfishing Specialties®, Sea Hornet®, Omer®, Demka®, Bandito®, and more. Spearit Group LLC unaffiliated with these manufacturers.