Every spearo knows that most bands fail directly over the wishbone terminal. If your rubber could talk, it would tell you that when it comes to wishbone terminals, size matters. In this case however, it is actually the smaller, the better. From the minute you install the wishbone, the rubber is stretched and under stress around the terminal. Smaller terminals mean less stress and longer lasting bands. Unfortunately, most manufacturers make wishbones for use with rings which require larger terminals. We have chosen terminal sizes specifically for hand tied bands.
Our 6 inch x 2.5mm stainless steel V wishbones are available with two terminal size options:
- Our small 6mm stainless steel terminals are easy to insert and easy on your rubber.
- Our larger 9mm stainless steel terminals are more forgiving for beginners who are still working to perfect their constrictor knot. We also recommend them for use with 11/16in(17.5mm) and 3/4in(19mm) rubber.
|
Compatibility:
General Compatibility - This item can be used with some products of Biller®, Ocean Rhino®, Spearfishing Specialties®, Sea Hornet®, Omer®, Demka®, Bandito®, JBL®, Cressi®, Picasso®, Beauchat®, and more. Spearit Group LLC unaffiliated with these manufacturers.
|
|